These custom boxes will full fill you needs

These Custom Boxes will full fill you needs 

Many companies order customized boxes for home information and announcements about new products, software packages, CD / DVDs, and other electronic media, or choose brochures, folders, and folders. This article will help you understand the extensive possibilities of using your boxes.
Some typical types of boxes include:

- Wavy

- Cloak

- Folded edge

Most people are familiar with Custom rigid boxes

boxes with thick brown (or kraft) wool. When checking the sidecut of the wavy wave C, you will notice that it is very wide and thick; good for sending things, but it's not good for taking the kind of images needed to bring the product to market.

The E-wave is only 1/16 "thick, much thinner than the C flute mentioned above." Some requirements can use wave or wave B custom rigid boxes F-cross is very thin (even thinner than E-flute) and is used for very small boxes or boxes that require complex punching. "Surprisingly, B-wave is thinner than C-wave, but stronger than E-wave B-wave is about 1/8" thick and is used for heavier serious projects.

Custom rigid boxes are usually stored by a mill and is determined by colors. Brown, oyster white, white.
White is the most expensive board and most sought after for graphical use.
Combinations are available on request. Oysters over Kraft or Bleached over Kraft are common. Usually, the custom rigid boxes portion of the custom rigid boxes cardboard is Kraft.

Custom rigid boxes cardboard decoration

Many customers prefer their custom rigid boxes cardboard boxes to 80-liters of paper, which can be laminated and applied to custom rigid boxes sheets. (this is the designation). Film lamination seals the print and allows the cabinet hinges to bnd without cracking. The label is attached to the custom rigid boxes plate before stamping. Film lamination can be both glossy and matt (also revealed). The label can be applied to the outside or inside of the box (also called the liner) or both. The label usually covers the entire box.

Flexography:

Imagine a big stamp and now you have a good idea of ​​flexography. If there is no need for complex 4-color process images, flexographic printing may be an alternative to consideration. Because flexo is not advanced, you can only expect a 65-line screen quality. This is significantly different from the 150-line screen quality that is common with lithography (marking).

The most cost-effective type of flexography is the flood layer (total coverage) of the color. Warehouse boards can be used to place paint on a blackboard. However, if you need to flip graphic images or fonts from a fixed array, or if you want to have a positive type or graphic, a custom printing plate must be created. Flexo boards are valued per square inch. The more pictures or types, the more expensive.

Reverse Edge Boxes and Top Boxes:

While custom rigid boxes boxes have "coarse edges" where wool is visible, the folded edge is different because the panel is covered with a cover. Instead of using custom rigid boxes board, we use different chipboard weights. These boxes are handmade in small quantities. Box machines are used in larger quantities. Reverse edge boxes cost more than custom rigid boxes boxes, but they have a better look.

Because chipboard is used, these boxes tend to weigh more than the Custom rigid boxes board. Set-up boxes fall into the category of finished boxes. These boxes are usually called gift boxes and jewelry boxes. Both twisted edges and set-boxes can be packaged in various packages, printed with paper, canvas, and attractive paper bundles.